Automatic battery insulation paper machine
18650 battery positive pole automatic insulation paper pasting equipment. Other types of batteries cannot be used universally, but the technical parameters are the same, please refer to. (e.g.option 21700/26650/32650, etc.)
Automatic sticker is mainly used to stick insulating paper on 18650 battery anode.
Cylindrical Battery Automatic Sticking Machine is a specially designed device for preventing short circuit of nickel sheet caused by shrinkage of PVC sleeve film on the positive electrode surface after high temperature of battery. It is equipped with a whole roll of insulating centrifugal paper punching die and automatically sticks to the positive electrode of battery by mechanical precise positioning.
According to the interval distance set on PLC software, the equipment sends the batteries to the designated position in sequence. The system can realize automatic punching and bonding, and is provided with an over pressure prevention mechanism.
18650 Battery Auto Sticker is a device specially developed for pasting insulating paper on the positive electrode of battery. Compared with manual operation, the bonding efficiency and bonding accuracy are greatly improved, and the material cost is saved. The equipment design is simple, the operation and debugging are clear at a glance, the human-machine interface language is simple, and the equipment can be used through simple training without excessive debugging.
Punching die
This automatic sticker machine matches the high precision punching
and pressing die.
Applicable to 18650 Cylindrical Battery. You can also customize Cylindrical Battery sticker machines with different specifications.
Put the whole battery box needing sticker into the feeding slot, and the roller drives the battery to run on the belt in sequence.
Machine control automatically completes all punching and pasting actions.
According to the set program, the machine will automatically feed the pasted battery into the material tank and can seamlessly connect the battery voltage internal resistance sorting equipment. The machine will run automatically without human intervention until the stop key is pressed and the machine stops working.
Punching out 3 pieces of battery insulation paper at a time.
The feeding method is designed to manually pour the battery into the inclined chute, which is convenient for operation.
The punching die is formed by precision machining of Mold Steel??
During the operation, people only need to take and put the battery paper box. The rest are all automatic and do not need to be pressed continuously. Greatly improve the working efficiency of workers and reduce the operation action of work on machines.
| 18650 battery sticker TOP–350 spec. | |||
| ??Note: The actual travel range can be customized according to customer
requirements. |
|||
| Automation Content | |||
| Name | Automatic battery sticker | No. | TOP-350 |
| Input
power supply |
200-240VAC 50/60Hz | Equipment power | 1200VA |
| Punching
quantity |
3PCS | Equipment gas
consumption |
0.113L/S |
|
List of technologies |
Content | Project requirements | Brand/Remarks |
| Control
system |
PLC |
panasonic |
|
| human-computer
interface |
Display (with touch) |
kunlun |
|
| Drive | electric motor | ||
| Transmission mode | Direct connection | ||
| Characteristics of
Punching Die |
High Precision
Wear-resistant Special Steel |
||
|
Adjustable range of air pressure |
adjust
0-5kg |
||
| Startup
mode |
Photoelectric switch induction | ||
|
Operating speed setting |
The safety value range can be set | ||
| Reset settings |
Start-up reset, abnormal can stop reset |
||
| Function setting |
Optional Quick Set Parameter Mode |
||
| The mechanism automatically and continuously moves
and ages. |
7 X 24-hour transmission aging runs smoothly without abnormal noise, looseness and
obvious wear. |
||
|
Lighting |
No lighting assistance | ||
|
Cable |
Ensure the
discharge loss meets the use requirements |
||
| Does not affect | |||
|
The cable does not pull or interfere with |
| other mechanism parts of the equipment. | |||
|
Machine frame |
Thickened sheet metal frame, fixed sheet metal is painted iron sheet, firmly preventing deformation and vibration. |
||
| The base is equipped with reusable casters, which are convenient to move. The mounting feet can be locked and fixed to prevent
movement. |
|||
| No acrylic board. | |||
| Launch/Panic Button | Start button, Panic Button. | ||
| Alarm
function |
Three-color light and sound alarm for
abnormal equipment |
||
| Mold cleaning agent | Standard | ||
| Iron brush | Standard | ||
| Common tools | 1 set of Allen wrenches | ||
| machine size | 1160 ( length) X 600 ( width) X 1600 ( height) mm | ||
