separator sorting machine

Functional description:

The 18650 battery eleven-speed one-measurement sorting machine is suitable for the voltage and internal resistance sorting test of the 18650 battery core which is divided by the battery core factory. The electrical control part of the sorting system adopts modular design, with high integration, good general purpose and convenient maintenance. The actuator adopts stepper motor control with high precision and good reliability. The number of receiving slots of the equipment is 10 slots, and the voltage and internal resistance can be set arbitrarily. The sorting efficiency is high, and the battery can be accurately sent to the specified gear according to the set internal resistance and voltage value. The equipment adopts the silo type loading, the cylinder automatically divides the material, and the personnel manually collects the material. Realize the automation of 18650 cell sorting.

Test items :

1. 18650 cylindrical battery voltage test
2. 18650 cylindrical battery internal resistance test
3. Based on the voltage and internal resistance test, the 18650 cylindrical battery is divided and the specification is set.

Main technical parameters:

Tester accuracy

1. Voltage measurement technical parameters

Voltage measurement resolution: 0.1MA

3561 battery measuring instrument voltage range: 19.9999V

Accuracy: ±0.025% R.D.±6dgt

1. Internal resistance measurement technical parameters

Internal resistance measurement resolution: 0.1mΩ

3561 battery tester resistance range: 310.00mΩ / 3.1000Ω

Accuracy: ±0.025% R.D.±6dgt

1. Internal resistance measurement frequency: 1KHz ± 0.2 KHz (AC four-terminal method)

D.1000-1 18650 battery eleven files one test sorter test efficiency

Trouble-free operation design capacity: 3,500 / hour

1. Test data

The tester test result data includes test time, cell voltage value, cell internal resistance value, and receiving set value, and the data is comprehensive.

F: 1000-1 18650 battery eleven files one measuring sorting machine for the battery core specification range

1. Applicable batteries: 65±0.3mm (length)*18±0.5mm (diameter) cylindrical battery
2. The battery core can not be used in bare cell or cowhide packaging. It must be heat-shrinked with PVC sleeve to prevent short circuit.
3. The surface of the heat-shrinkable film of the battery core must be flat, and there should be no bulging, deformation, distortion, damage, etc., to prevent malfunction of the battery core material.
4. Both the positive and negative ends of the battery must be clean, and there must be no dirt, stains, oxidation, foreign matter, etc., to prevent the impact of the voltage and internal resistance of the battery.

Parameters of the whole machine:

1. Host input power: single phase 220V/50Hz
2. Dimensions: 1540mm (length) * 800mm (width) * 1400mm (height)
3. Access air pipe: φ10mm (outer diameter)
4. Air source low pressure: 0.4~0.6MPa
5. Machine weight: 280KG
6. Machine power: 0.5KW

• General configuration and standards of equipment

1. Equipment equipped with tools: 1 set of instructions, 1 set of Allen wrenches, and accessories for consumable parts list.
2. The equipment complies with the safety standards of the national equipment and meets the safety standards required by the relevant party’s safety code.

3, the main configuration list